Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Post: #1



Block Diagram Description:

The basic block diagram of the Automatic Room Light Controller with Visitor Counter is shown in the above figure. Mainly this block diagram consists of the following essential blocks.
1. Power Supply
2. AT89S52 micro-controller
3. Entry and Exit sensor circuit
4. Relay driver circuit

Power Supply:
Here we used +12V and +5V dc power supply. The main function of this block is to provide the required amount of voltage to essential circuits. +12 voltage is given. +12V is given to relay driver. To get the +5V dc power supply we have used here IC 7805, which provides the +5V dc regulated power supply.

89S52 Microcontroller:
It is a low-power, high performance CMOS 8-bit microcontroller with 8KB of Flash Programmable and Erasable Read Only Memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the MCS-51TM instruction set and pin out. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic hip, the Atmel AT89S52 is a powerful microcontroller, which provides a highly flexible and cost effective solution to so many embedded control applications.

Enter and Exit Circuits:
This is one of the main part of our project. The main intention of this block is to sense the person. By using this sensor and its related circuit diagram we can count the persons.

Relay Driver Circuit:
This block has the potential to drive the various controlled devices. In this block mainly we are using the transistor and the relays. One relay driver circuit we are using to control the light. Output signal from AT89S52 is given to the base of the transistor, which we are further energizing the particular relay. Because of this appropriate device is selected and it do its allotted function.


Introduction to Embedded Systems:

Embedded systems are electronic devices that incorporate microprocessors with in their implementations. The main purposes of the microprocessors are to simplify the system design and provide flexibility. Having a microprocessor in the device means that removing the bugs, making modifications, or adding new features are only matters of rewriting the software that controls the device. Or in other words embedded computer systems are electronic systems that include a microcomputer to perform a specific dedicated application. The computer is hidden inside these products. Embedded systems are ubiquitous. Every week millions of tiny computer chips come pouring out of factories finding their way into our everyday products.

Embedded systems are self-contained programs that are embedded within a piece of hardware. Whereas a regular computer has many different applications and software that can be applied to various tasks, embedded systems are usually set to a specific task that cannot be altered without physically manipulating the circuitry. Another way to think of an embedded system is as a computer system that is created with optimal efficiency, thereby allowing it to complete specific functions as quickly as possible.
Embedded systems designers usually have a significant grasp of hardware technologies. They used specific programming languages and software to develop embedded systems and manipulate the equipment. When searching online, companies offer embedded systems development kits and other embedded systems tools for use by engineers and businesses.
Embedded systems technologies are usually fairly expensive due to the necessary development time and built in efficiencies, but they are also highly valued in specific industries. Smaller businesses may wish to hire a consultant to determine what sort of embedded systems will add value to your organization.

Two major areas of differences are cost and power consumption. Since many embedded systems are produced in the tens of thousands to millions of units range, reducing cost is a major concern. Embedded systems often use a (relatively) slow processor and small memory size to minimize costs.
The slowness is not just clock speed. The whole architecture of the computer is often intentionally simplified to lower costs. For example, embedded systems often use peripherals controlled by synchronous serial interfaces, which are ten to hundreds of times slower than comparable peripherals used in PCs.
Post: #2
to get information about the topic "Automatic Room light Controller with Visitor Counter" full report ppt and related topic refer the link bellow
Post: #3
please I need this project on my mail. georgekadiri24[at] . thanks
Post: #4
please I need this project details on my email. georgekadiri24[at] I wiil be glad if u can help me with it.
Post: #5
please I need this project details on my email.
georgekadiri24[at] I wiil be glad if u can
help me with it.
Post: #6
To get full information or details of AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER please have a look on the pages

if you again feel trouble on AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER please reply in that page and ask specific fields in AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER
Post: #7

Marked Categories : automatic room light control, how we can apply power supply automatic room light controller and visitor counter, document on automtic room light control, report file on embedded system with project visitor counter, report on counter topic, seminar report on automatic room light control using visitor counter, power supply circuit for automatic room light controller with visitor counter, seminar report on automatic room light controller with visitor counter, automatic room light controller with visitor counter power supply diagram, automatic room light controller with visitor counter project report, automatic room light controller with visitor counter,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Mini project report on SHADOW ALARM project girl 6 11,060 20-01-2018 02:07 PM
Last Post: Austinfloro
  water cooler project report Guest 2 0 20-01-2018 10:21 AM
Last Post: Guest
  hydroforming full report project report tiger 5 25,294,040 19-01-2018 01:37 AM
Last Post: Guest
  nrega project report er diagram Guest 1 0 18-01-2018 03:31 PM
Last Post: dhanabhagya
  COST EFFECTIVENESS OF MINERAL WOOL INSULATION Vs PERLITE INSULATION full report project report tiger 2 11,836,069 18-01-2018 11:53 AM
Last Post: dhanabhagya
  Solar pond technology full report seminar girl 2 782 18-01-2018 10:08 AM
Last Post: dhanabhagya
  suggestion for informative report of public deposits invited by company Guest 1 0 18-01-2018 10:06 AM
Last Post: dhanabhagya
  Ultrasonic Trapping In Capillaries For Trace-Amount Bi (Download Full Seminar Report) Computer Science Clay 2 6,465,205 17-01-2018 11:59 AM
Last Post: dhanabhagya
  fuel from plastic waste full report seminar presentation 25 97,642,316 17-01-2018 10:40 AM
Last Post: dhanabhagya
  nanorobotics full report project topics 24 76,278,635 16-01-2018 05:50 PM
Last Post: Guest
This Page May Contain What is AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER full report And Latest Information/News About AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER full report,If Not ...Use Search to get more info about AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER full report Or Ask Here