Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Basic Principles of Ultrasonic Testing
Post: #1

Basic Principles of Ultrasonic Testing

.ppt  welding_2.ppt (Size: 628.5 KB / Downloads: 347)

basic principles of ultrasonic testing Wave propagation

Longitudinal waves propagate in all kind of materials.
Transverse waves only propagate in solid bodies.
Due to the different type of oscillation, transverse waves travel at lower speeds.
Sound velocity mainly depends on the density and E-modulus of the material.

Reflection and Transmission

As soon as a sound wave comes to a change in material characteristics ,e.g. the surface of a workpiece, or an internal inclusion, wave propagation will change too:

Reception of ultrasonic waves

A sound wave hitting a piezoelectric crystal, induces crystal vibration which then causes electrical voltages at the crystal surfaces.
Post: #2
Ultrasonics Testing

.docx  ultra sonic.docx (Size: 136.01 KB / Downloads: 72)


Ultrasonics is the name given to the study and application of ultrasound, which is sound of a pitch too high to be detected by the human ear, i.e. of frequencies greater than about 18 kHz. Ultrasonic waves have a wide variety of applications over an extended range of intensity, including cutting, cleaning and the destruction of tissue at the upper extremity and non-destructive testing (NDT) at the lower end. A non-destructive test is one in which there is no impairment of the properties and performance in future use of the object under examination. With ultrasonic non-destructive testing, which is effectively a mechanical method, periodic mechanical stresses are applied to the object. It is essential that there have been no changes in dimensions and structure of the object when the test is completed. This can only be achieved when the maximum applied stresses do not exceed the elastic limit below which Hookels law is obeyed, so that the resultant strain is proportional to the applied stress. Hence it is necessary that the ultra- sonic intensity is sufficiently low for the elastic limit not to be exceeded. Ultrasonic testing consists effectively of the propagation of low amplitude waves through a material to measure either or both the time of travel and any change of intensity for a given distance. Applications include distance gauging, flaw detection and measuring parameters (such as elastic moduli and grain size) which are related to the material structure. Reasons for using ultrasonic as opposed to audible fre quencies include the following.

The main advantages of ultrasonic testing are:

• testing can be carried out from a single surface;
• a high degree of penetration is possible in many commonly-used materials, which is in contrast with the lower degree of penetration encountered with radiological testing of metals;
• accuracy in locating and measuring defects;
• the ability to detect and size very small defects; and
• compatibility with automatic scanning devices and with micro- processors and computers.

The principal drawbacks are these:

• Operators must be properly trained, highly experienced and possess a high degree of reliability and integrity. However, with 100 % automated testing, these requirements may be somewhat relaxed provided that the functions of the automated system are thoroughly understood.
• With manual operation over a large surface area only a small part of a surface can be scanned at a time, although this can be improved upon, where feasible, with the use of transducer arrays.
• A high degree of coupling between the transducer and the surface to be scanned is required, though much progress is now being made with the development of non-contact transducers.

Piezoelectric Transducers

The conversion of electrical pulses to mechanical vibrations and the conversion of returned mechanical vibrations back into electrical energy is the basis for ultrasonic testing. The active element is the heart of the transducer as it converts the electrical energy to acoustic energy, and vice versa. The active element is basically a piece of polarized material (i.e. some parts of the molecule are positively charged, while other parts of the molecule are negatively charged) with electrodes attached to two of its opposite faces. When an electric field is applied across the material, the polarized molecules will align themselves with the electric field, resulting in induced dipoles within the molecular or crystal structure of the material. This alignment of molecules will cause the material to change dimensions. This phenomenon is known as electrostriction. In addition, a permanently-polarized material such as quartz (SiO2) or barium titanate (BaTiO3) will produce an electric field when the material changes dimensions as a result of an imposed mechanical force. This phenomenon is known as the piezoelectric effect. Additional information on why certain materials produce this effect can be found in the linked presentation material, which was produced by the Valpey Fisher Corporation.
Post: #3
nyc job http://seminarprojects...keep it guyz
Post: #4
To get full information or details of Basic Principles of Ultrasonic Testing please have a look on the pages

if you again feel trouble on Basic Principles of Ultrasonic Testing please reply in that page and ask specific fields in Basic Principles of Ultrasonic Testing

Marked Categories : basic princple ultasonic testing, basic ultrasonic principles, ultrasonic inspection ppt, ultra sonic testing method file type doc, basic principles involved ultrasonic testing, ultrasonic testing ppt pdf, basic principles of ultrasonic testing, basic ultrasonic testing, ultrasonic testing basic principles, project report ultrasonic testing, ultrasonic testing, ultrasonic testing basic, principles of ultrasonic testing, ppt on application of piezoelectric crystal in ultrasonic inspection, basic principle ultrasonic testing, basic principles of ultrasonic testing ppt, basic principles of ultrasonc testing, basic principle of ultrasonic testing, ultrasonic,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Ultrasonic Trapping In Capillaries For Trace-Amount Bi (Download Full Seminar Report) Computer Science Clay 2 6,456,642 17-01-2018 11:59 AM
Last Post: dhanabhagya
  seminar topics on basic parasitology Guest 1 0 07-11-2017 10:44 AM
Last Post: jaseela123
  seminar topics on basic parasitology Guest 1 0 17-10-2017 09:33 AM
Last Post: jaseela123
  basic electronics projects abstracts Guest 1 153 13-10-2017 01:05 PM
Last Post: jaseela123
  limitations and principles of direct energy conversion Guest 1 259 10-10-2017 12:46 PM
Last Post: jaseela123
  ultrasonic interferometer experiment Guest 1 206 09-10-2017 09:25 AM
Last Post: jaseela123
  design and fabrication of shock absorber testing machine in pdf Guest 1 305 06-10-2017 03:18 PM
Last Post: jaseela123
Thumbs Down cdg relay testing Guest 1 199 05-10-2017 11:06 AM
Last Post: jaseela123
  ultrasonic welding seminar report pdf download Guest 1 267 30-09-2017 02:24 PM
Last Post: jaseela123
  show a project report on basic beauty parlour Guest 1 0 27-09-2017 12:24 PM
Last Post: jaseela123
This Page May Contain What is Basic Principles of Ultrasonic Testing And Latest Information/News About Basic Principles of Ultrasonic Testing ,If Not ...Use Search to get more info about Basic Principles of Ultrasonic Testing Or Ask Here