Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cast Iron PPT
Post: #1

Cast Iron

.ppt  Cast Iron.ppt (Size: 2.73 MB / Downloads: 55)

What is cast iron?

Alloys of iron and carbon with more than 2.11% carbon are called cast irons.

Cast iron

Family of ferrous alloys
• Cast into desired shape – not worked
• 2-4% C and 1-3% Si
• Instability of Fe3C:
– Cementite / graphite flakes / graphite

White cast iron

• Fe3C + pearlite
• Hard, brittle
• Shows a “white” crystalline
fractured surface
• Excellent wear resistance
• High compressive strength
Has excellent wear resistance
But is very brittle
Finds use as
balls for grinding mills,
liners for cement mixers and
rolls for paper manufacture

Ferritic vs.Pearlitic gray iron

If all the carbon is in the form of graphite, we have ferritic gray iron, where the graphite flakes are embedded in a matrix of ferrite
If only a part of the carbon is in the form of graphite, we have the pearlitic gray iron, with pearlite as the matrix.

General characteristics/advantages
of gray cast iron

• Cheaper than steel, as temperature to be
attained for making it is several hundred
degrees lower than for casting steel. Also
control of impurities is not critical here, as in
steel making.
• It has excellent fluidity, even large complex
shapes can be cast advantageously.
• Excellent machinability, as chip formation is
promoted by the graphite flakes. In addition the
flakes serve as a lubricant for the cutting tool.

Advantages/disadvantages of gray cast iron

The wear resistance of gray iron is very good, as graphite flakes act as lubricant.
The damping capacity (ability to damp vibrations) of gray iron is superior to that of steel
Can be alloyed to improve properties, e.g. Nihard iron with 4%Ni and 1.5%Cr has excellent wear resistance.
Graphite flakes are sharp at their tips and act like internal cracks or stress raisers. For this reason gray iron is brittle and shows only about 0.5% elongation in tension.

Factors that influence the formation of graphite

Cooling rate
Thick cross sections or castings in sand moulds tend to have graphite, as the cooling rate is slow.
Chill castings (in metal moulds) and thin cross sections tend to have cementite.
This effect can also be seen in the fracture appearance across the cross section varying from white at the surface to gray inside. The transition region has the “mottled” appearance

Uses of gray iron

The good damping capacity and the high compressive strength make it suitable as a base for erection of machinery.
Ease of machining, good wear resistance and damping capacity are utilized in applications such as locomotive and internal combustion engine cylinder blocks and heads
Ease of casting and low cost make it suitable for flywheels and counterweights for lifts
Niresist with 20%Ni and 2%Cr has excellent corrosion resistance and heat resisting properties and is used for handling alkalis at high temperatures.

Malleable cast iron

• White cast iron (typical composition 2.5%C and
1%Si)+ prolonged heat treatment at 900-950oC
followed by very slow cooling
• During this treatment cementite decomposes to
the more stable form (graphite). The free carbon
precipitates in the form of spheroidal particles

Marked Categories : white iron ppt, cast iron ppt, ppt gray cast iron, microstructure of steel and cast iron ppt, manufacturing cast iron ppt, ppt of wrought iron, genral seminar topic slides of cast irons and their heat treatment download, fe3c for cast iron powerpoint its, ppt of cast iron, recent application of cast iron ppt, ppt mechanical casting, gray cast iron ppt, saminar topics for cast iron, ppt how to use iron, cast iron composition ppt, properties and use of cast iron ppt, family of cast iron ppt, si carbon ppt, graphite type damping gray, graphite type damping, characteristic of cast iron ppt, white cast iron ppt, seminar topics on iron mechanical engineering with ppt,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ppt of vertical lift mechanism ppt Guest 1 508 04-10-2017 11:56 AM
Last Post: jaseela123
  arsenic sequestration by metallic iron under reducing conditions subine 1 91 20-09-2017 04:39 PM
Last Post: jaseela123
  PYROPHORIC IRON FIRE super 0 13,689,779 25-08-2017 09:32 PM
Last Post: super
  Influence of an iron fuel additive on the performance and emissions of a DI diesel en Computer Science Clay 0 3,595,198 25-08-2017 09:32 PM
Last Post: Computer Science Clay
  A near-optimal multi cast scheme for mobile ad hoc networks using a hybrid genetic al computer science crazy 0 2,868,166 25-08-2017 09:32 PM
Last Post: computer science crazy
  Influence of an iron fuel additive on the performance and emissions of a DI diesel en mechanical engineering crazy 0 5,905,668 25-08-2017 09:32 PM
Last Post: mechanical engineering crazy
  ooad ppt ali bahrami ppt presentation Guest 1 182 08-08-2017 11:46 AM
Last Post: jaseela123
  pavement stabilization using iron ore waste along n h 17 Guest 1 206 02-05-2017 03:33 PM
Last Post: jaseela123
  Nitrate Removal from Water Using Synthesis Nanoscale Zero-Valent Iron (NZVI) mkaasees 0 0 20-10-2016 02:38 PM
Last Post: mkaasees
  The Iron-Carbon Diagram mkaasees 0 0 07-09-2016 11:13 AM
Last Post: mkaasees
This Page May Contain What is Cast Iron PPT And Latest Information/News About Cast Iron PPT,If Not ...Use Search to get more info about Cast Iron PPT Or Ask Here