Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)


Tags: SYSTEM, INJECTION, DIESEL, RAIL, COMMON, COMMON RAIL DIESEL INJECTION SYSTEM,
 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
COMMON RAIL DIESEL INJECTION SYSTEM
Post: #1


.pptx  1467289524-MiniProjectPresentation1.pptx (Size: 1.1 MB / Downloads: 3)



Common Rail Diesel Fuel Systems
The aim of this presentation is to give a generic technical overview of the main features and operating principles of the common rail diesel fuel injection system..
All facts and figures quoted are intended to show typical examples only for explanation purposes.




Common Rail Diesel Fuel Systems
Advantages of common rail:
Fuel pressure available on demand...
Higher injection pressures and finer atomization of fuel...
Injection pressure created independent of engine speed...
Multiple injections per cylinder combustion are possible.

Benefits of common rail:
Reduction of overall exhaust emissions...
Reduction of particulate emissions...
Reduction of noise emissions...
Improved fuel efficiency...
Higher performance.

Common Rail Diesel Fuel Systems
Examples of typical common rail system maximum fuel pressures:
Bosch:Generation 1: up to 1350 Bar (19845 psi). Unijet
Generation 2: up to 1600 Bar (23520 psi) EDC 16
Generation 3: up to 2000 Bar + (29400 psi)
Denso: 1st generation: up to 1450 Bar (21315 psi) ECD-U2P 2nd generation: 1800 Bar + (26460 psi) HP3/HP4
Delphi : Multec: up to 2000 Bar
Direct acting diesel common rail system: up to 2000 Bar
Various systems differ in design, components layout and specific functions. However, all operate in a similar way.




Bosch EDC16
Common Rail Diesel Fuel Systems
High pressure fuel pump
The High pressure pump is the interface between the low pressure and the high pressure side of the fuel system.

Basic function:
To ensure that enough fuel is delivered at sufficient pressure across the engine’s entire operating range. This includes delivery of sufficient fuel for a rapid engine start and pressure increase in the rail.

Common Rail Diesel Fuel Systems
High pressure fuel pump

Transfer pump supplies fuel from the fuel tank to the pumping chambers of the high pressure pump.
Fuel metering valve regulates the fuel intake volume to the pumping chambers of the high pressure pump
Common Rail Diesel Fuel Systems
Fuel volume intake control

Pump piston
Pressure valve
to common rail
Suction valve
Return
Safety valve
Feed (from the tank)
Gear pump
Fuel metering control valve
Throttle bore
Control piston
Lubricating-oil bore
High-pressure pump

Common Rail Diesel Fuel Systems
Advantages of fuel intake volume regulation:
Only the required volume of fuel is supplied to the common rail from the high pressure pump...
Reduced fuel flow around system results in lower fuel return flow temperature...
Reduced parasitic load on engine from high pressure pump contributes towards further reductions in exhaust emissions.

Common Rail Diesel Fuel Systems
High pressure accumulator (common rail)

Fuel is supplied to the common rail at high pressure from the high pressure pump.
The rail stores the fuel and distributes it to the individual injectors.

It also damps pressure vibrations caused by the high pressure pump and injection processes.
Typical volume of fuel held in common rail: 16 – 20cm³.

Common Rail Diesel Fuel Systems
Fuel system diagnosis

Injector leak back test

There should not normally be any fuel collected in receptacles during engine cranking.
Example of acceptable leak back value with engine idling: approximately 20ml per injector over a 2 minute period.
(Always refer to manufacturer data for exact specifications
Common Rail Diesel Fuel Systems
The fuel system can be divided into three basic circuits

Low pressure supply circuit
High pressure delivery circuit
Fuel leak back and return
 

Marked Categories : diesel fuel injection system seminar report doc,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Methanol Fueled Marine Diesel Engine ppt Guest 1 0 15-11-2017 11:34 AM
Last Post: jaseela123
  Industrial Conveyor System Using Magnetic Levitation system seminar code 2 251 25-10-2017 12:03 PM
Last Post: jaseela123
  existing system and proposed system of hotel management system Guest 1 424 12-10-2017 12:00 PM
Last Post: jaseela123
  2 stroke aircraft diesel engine Guest 1 257 12-10-2017 09:27 AM
Last Post: jaseela123
  diesel locomotive power pack assembly ppt parel Guest 1 121 11-10-2017 02:46 PM
Last Post: jaseela123
  existing system and proposed system in smart note taker Guest 1 163 09-10-2017 04:59 PM
Last Post: jaseela123
Sad anna university project report injection moulding Guest 1 340 06-10-2017 11:59 AM
Last Post: jaseela123
  diesel locomotive power pack assembly ppt parel Guest 1 211 04-10-2017 03:51 PM
Last Post: jaseela123
  seminar report based on 2 stroke aircraft diesel engines Guest 1 154 04-10-2017 11:29 AM
Last Post: jaseela123
  chennai metro rail project ppt Guest 1 200 03-10-2017 10:47 AM
Last Post: jaseela123
This Page May Contain What is COMMON RAIL DIESEL INJECTION SYSTEM And Latest Information/News About COMMON RAIL DIESEL INJECTION SYSTEM,If Not ...Use Search to get more info about COMMON RAIL DIESEL INJECTION SYSTEM Or Ask Here

Options: