Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Control of Boiler Operation using PLC – SCADA full report
Post: #1

Submitted by: -
Mohd Ahtesham

.pptx  New Control of Boiler Operation using PLC-SCADA.pptx (Size: 3.3 MB / Downloads: 251)
Over the years the demand for high quality, greater efficiency and automated machines has increased in the industrial sector of power plants. Power plants require continuous monitoring and inspection at frequent intervals. There are possibilities of errors at measuring and various stages involved with human workers and also the lack of few features of microcontrollers. Thus this paper takes a sincere attempt to explain the advantages the companies will face by implementing automation into them.
The boiler control which is the most important part of any power plant, and its automation is the precise effort of this paper.
In order to automate a power plant and minimize human intervention, there is a need to develop a SCADA (Supervisory Control and Data Acquisition) system that monitors the plant and helps reduce the errors caused by humans. While the SCADA is used to monitor the system, PLC (Programmable Logic Controller) is also used for the internal storage of instruction for the implementing function such as logic, sequencing, timing, counting and arithmetic to control through digital or analog input/ out put modules various types of machines processes.
Systems are used to monitor and control a plant or equipment in industries such as oil and gas refining, water and waste control and transportation.
Errors due to the involvement of humans in the data collection and processing using complicated mathematical expressions.
In the coding process of this implementation with micro-controller, it requires a fast and efficient processing which on the other part depends on the length and sub-routines of the coding process.
A. Level Control
Steam Drum level, De-aerator level and hot well level
B. Pressure Control
Force draft pressure, Induced draft pressure, Steam drum pressure, De-aerator pressure, Turbine inlet steam pressure, balanced draft pressure
C. Flow Control
Air flow, Steam flow, Water flow
D. Temperature Control
Steam drum temperature, Underbed boiler temperature, Turbine inlet steam temperature, Flue gas temperature.
Manual Control
In this, the Control and Automation are done by
Manual Operations.
• Human Errors subsequently affect quality of end
• Hard Wired Logic Control
• Bulky and complex wiring,
Electronics Control with Logic Gates
In this, Contactor and Relays together with timers
and counters were replaced with logic gates and
electronic timers in the control circuits.
• Reduced space requirements, energy saving, less
maintenance and hence greater reliability.
The Major Drawbacks
• Implementation of changes in the control logic as
well as reducing the project lead- time was not
Programmable Logic Controller
In this, instead of achieving desired control and
automation through physical wiring of control
devices, it is achieving through program say software.
Reduced Space, Energy saving, Easy trouble shooting, Error diagnostics programmer, Economical, Greater life and reliability,
PLC Working
At the beginning of each cycle the CPU brings in all the field input signals from the input signals from the module and store into internal memory as process of input signal. This internal memory of CPU is called as process input image (PII). User program (Application) will be available in CPU program memory. Once PII is read, CPU pointer moves in ladder program from left to right and from top to bottom. CPU takes status of input from PII and processes all the rungs in the user program. The result of user program scan is stored in the internal memory of CPU. This internal memory is called process output image or PIQ. At the end of the program run i.e., at the end of scanning cycle, the CPU transfers the signal states in the process image output to the output module and further to the field control.
I/O driver (SCADA) picks up PII and PIQ and transfers the image to database and this image is called driver image. This driver image available in SCADA database is used for graphical view of process monitoring from operator station (OS) in the central control room.
SCADA stands for Supervisory Control and Data Acquisition. As the name indicates, it is not a full control system, but rather focuses on the supervisory level [2].
What is SCADA? It is used to monitor and control plant or equipment. The control may be automatic or initiated by operator commands. The data acquisition is accomplished firstly by the RTU’s(Remote telemetry or terminal units) scanning the field inputs connected to the RTU (it may be also called a PLC – programmable logic controller.). This is usually at a fast rate. The central host will scan the PTU’s (usually at a slower rate). The data is processed to detect alarm conditions, and if an alarm is present, it will be displayed on special alarm lists.

Marked Categories : scada plc, plc in hotwell level control, control of boiler operation using plc scada pdf, scada operation of boiler, plc applications for mechanical engineering, ladder logic development to control drum level in boiler, boiler contorl using plc, automatic boiler temperature controller using plc, boiler process plc program, hotwell automation using plc with scada, gas boilers forums powered by mybb, to control boiler operation using scada, semnar repot on scada power, project report on plc and scada, water flow control system using plc scada, boiler operation engineer ppt, scada full name, boiler related project using scada, boiler control, control of boiler,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Mini project report on SHADOW ALARM project girl 6 11,060 20-01-2018 02:07 PM
Last Post: Austinfloro
  water cooler project report Guest 2 0 20-01-2018 10:21 AM
Last Post: Guest
  hydroforming full report project report tiger 5 25,384,438 19-01-2018 01:37 AM
Last Post: Guest
  nrega project report er diagram Guest 1 0 18-01-2018 03:31 PM
Last Post: dhanabhagya
  COST EFFECTIVENESS OF MINERAL WOOL INSULATION Vs PERLITE INSULATION full report project report tiger 2 11,885,895 18-01-2018 11:53 AM
Last Post: dhanabhagya
  Solar pond technology full report seminar girl 2 782 18-01-2018 10:08 AM
Last Post: dhanabhagya
  suggestion for informative report of public deposits invited by company Guest 1 0 18-01-2018 10:06 AM
Last Post: dhanabhagya
  Ultrasonic Trapping In Capillaries For Trace-Amount Bi (Download Full Seminar Report) Computer Science Clay 2 6,494,321 17-01-2018 11:59 AM
Last Post: dhanabhagya
  fuel from plastic waste full report seminar presentation 25 97,985,047 17-01-2018 10:40 AM
Last Post: dhanabhagya
  nanorobotics full report project topics 24 76,557,045 16-01-2018 05:50 PM
Last Post: Guest
This Page May Contain What is Control of Boiler Operation using PLC – SCADA full report And Latest Information/News About Control of Boiler Operation using PLC – SCADA full report,If Not ...Use Search to get more info about Control of Boiler Operation using PLC – SCADA full report Or Ask Here