Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)


 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
sequencial switching of loads using microcontroller
Post: #1

Hi
What circuit would work best for electro magnet switching. I am trying to build a electromagnetic accelerator, to propel a iron bullet, in a straight line. I am sure that the last few magnets will have to switch faster than the first, because of acceleration. I was thinking along the lines of using optic electronic circuits.
Regards
Arnie.
Post: #2
PLCs have their use in many areas, including basic relay control, motor control or motion control, industrial process control and complex networks. PLCs are often very expensive due to their ability to handle very complex process control, high speed and precision.
This project deals with an interesting way to achieve the sequential switching of loads in the repetitive nature of the work with the help of the micro controller 8051. It achieves a similar functionality to a PLC based on a micro-controller, where different loads are commuted according to the times Pre-programmed or the timings set during the execution time.
Beginning
The main principle in the operation of the project are the timers and interruptions of the micro-controller.
For normal operation, the loads are switched sequentially according to the time set by the user. Internally, the timer 8051 is executed according to the time and once it reaches the set time, it automatically switches the load and resets the timer.
If the user wants to change the time intervals, he must press the button of configuration. This acts as an external interrupt to the micro-controller. Once the micro-controller receives the interrupt, the micro-controller turns off all loads and initialises the user input. With the help of two push-buttons, the desired time can be set.

Circuit diagram

[Image: PLC-For-Website.jpg]
 


[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  detection of glaucoma using image processing techniques Guest 0 0 17-10-2017 07:49 PM
Last Post: Guest
  Industrial Conveyor System Using Magnetic Levitation system seminar code 1 251 17-10-2017 04:39 PM
Last Post: Guest
Shocked ambulance rescue system using gps and gsm Guest 1 255 14-10-2017 03:25 PM
Last Post: jaseela123
  case study of bata shoes company using mis Guest 1 265 14-10-2017 01:03 PM
Last Post: jaseela123
  embedded c code sms based wireless electronic notice board using gsm Guest 1 294 14-10-2017 12:59 PM
Last Post: jaseela123
  digital code lock using 8085 microprocessor Guest 1 192 14-10-2017 12:52 PM
Last Post: jaseela123
  ppt presentation for seminar wireless accident information system using gsm and gps Guest 1 213 14-10-2017 12:43 PM
Last Post: jaseela123
  ppt on calculator using microcontroller 8051 Guest 1 0 14-10-2017 12:26 PM
Last Post: jaseela123
  DETECTION OF GAS LEAKAGE USING GSM seminar class 18 9,617,095 14-10-2017 11:25 AM
Last Post: jaseela123
Wink electronic notice board using arduino full project report Guest 1 293 14-10-2017 11:14 AM
Last Post: jaseela123
This Page May Contain What is sequencial switching of loads using microcontroller And Latest Information/News About sequencial switching of loads using microcontroller,If Not ...Use Search to get more info about sequencial switching of loads using microcontroller Or Ask Here

Options: