Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)


 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups
Post: #1

Abstract

Twelve tests were conducted on reinforced concrete beams with three steel fiber-volume fractions (0, 0.5, and 0.75%), three shear span-depth ratios (2, 3, and 4), and two concrete compressive strengths (31 and 65 MPa). The results demonstrated that the nom- inal stress at shear cracking and the ultimate shear strength increased with increasing fiber volume, decreasing shear span- depth ratio, and increasing concrete compressive strength. As the fiber content increased, the failure mode changed from shear to flexure. The results of 139 tests of fiber-reinforced concrete beams with- out stirrups were used to evaluate existing and proposed empirical equations for estimating shear strength. The test population included beams with a wide range of beam properties, but most of the beams were small. The evaluation indicated that the equations developed by Narayanan and Darwish and the equations proposed herein provided the most accurate estimates of shear strength and the onset of shear cracking. For the proposed procedure, the ratio of the measured strength to the calculated strength had a mean of 1.00 and a coefficient of variation of 15%.

INTRODUCTION

The addition of steel fibers to a reinforced concrete beam is known to increase its shear strength and, if sufficient fibers are added, a brittle shear failure can be suppressed in favour of more ductile behavior.1,2 The increased shear strength and ductility of fiber-reinforced beams stems from the post- cracking tensile strength of fiber-reinforced concrete. This residual strength also tends to reduce crack sizes and pacings. The use of steel fibers is particularly attractive for high-strength concrete, which can be elatively brittle without fibers, or if conventional stirrups can be eliminated, which reduces reinforcement ongestion. The literature describes numerous studies of rectangular, fiber-reinforced beams without stirrups,2-21 of which 163-18 were reviewed by Adebar et al.2 Batson, Jenkins, and Spat- ney performed the first large experimental study of such beams,4 which included 42 tests of fiber-reinforced beams with- out stirrups that failed in shear. Subsequent investigations of normal-strength concrete6,7,9-17 (primarily in the 1980s) and high-strength concrete3,5,19,21(primarily in the 1990s) con- firmed the effectiveness of adding steel fibers and identified key parameters that affect shear strength. The increase in shear strength can vary drastically depending on the beam geometry and material properties. For example, in tests reported by Narayanan and Darwish,13 the increase in shear strength attributable to steel fibers varied from 13 to 170%.


Attached File(s)
.pdf  1454570271-kwakeberhardacijournaljul02.pdf (Size: 117.14 KB / Downloads: 35)
 


[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  electronic projects without ic Guest 1 198 18-11-2017 11:19 AM
Last Post: jaseela123
  tata steel jet sample question paper Guest 1 635 18-11-2017 09:35 AM
Last Post: jaseela123
  salem steel plant ipt 2017 Guest 1 0 15-11-2017 11:03 AM
Last Post: jaseela123
  special concrete and mortar ppt Guest 1 210 14-10-2017 12:43 PM
Last Post: jaseela123
  ppt bagasse ash concrete Guest 1 230 14-10-2017 10:49 AM
Last Post: jaseela123
  concrete filled steel tubes ppt Guest 1 153 14-10-2017 09:03 AM
Last Post: jaseela123
Thumbs Up litracon concrete pdf Guest 1 0 12-10-2017 10:41 AM
Last Post: jaseela123
  core type shear wall Guest 1 169 12-10-2017 10:20 AM
Last Post: jaseela123
  concrete mix design code is 10262 free download Guest 1 231 10-10-2017 01:32 PM
Last Post: jaseela123
  summer internship in vizag steel plant Guest 1 130 10-10-2017 12:56 PM
Last Post: jaseela123
This Page May Contain What is Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups And Latest Information/News About Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups,If Not ...Use Search to get more info about Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups Or Ask Here

Options: